China YSM6-12 ~ 24 Jagoran Shigar da Jirgin Ruwa don RMU Rarraba Wutar Lantarki (Kafaffen Nau'in) Masana'antu da Masana'antu

Bayanin Samfura
Cikakken Bayani
Zazzage bayanai
Samfura masu dangantaka

Tuntube Mu

YSM6-12~24 Jagoran Shigar da Insulated Air don RMU Rarraba Wutar Lantarki (Kafaffen Nau'in)

Hoto

YSM6-12~24 Jagorar shigar da iska mai rufi don ...

YSM6-12 / 24 naúrar nau'in SF6 RMU tare da SF6 lodi mai sauyawa azaman babban canji, don duka majalisar ministocin da ta dace don rarraba sarrafa wutar lantarki da ƙaramin ƙarfi kuma fadada ƙarfe kusa da switchgeart It characters a cikin sauƙin tsarin sa, aiki mai sassaucin ra'ayi, amintaccen haɗin gwiwa da shigarwa mai dacewa da sauransu, wanda zai iya samar da ingantaccen ayyukan fasaha duka biyu. don lokuta daban-daban na aikace-aikace da masu amfani.Tare da karɓar fasahar firikwensin da watsa kariyar har zuwa yau, da fasaha na ci gaba da aikin haɗuwa mai sassauƙa.

Tuntube Mu

Cikakken Bayani

YSM6-12/24 nau'in nau'in nau'in SF6 RMU tare da sauya nauyin SF6 azaman babban canji, don duka majalisar ministocin ta dace da sarrafa wutar lantarki da keɓaɓɓiyar rarrabawa da ƙaramin ƙarfi kuma mai faɗaɗa ƙarfe kusa da switchgear. Yana haruffa a cikin tsari mai sauƙi, aiki mai sassauƙa, haɗin kai mai dogara da shigarwa mai dacewa da dai sauransu, wanda zai iya samar da ayyukan fasaha masu gamsarwa duka don lokuta daban-daban na aikace-aikacen da masu amfani. Tare da ƙwaƙƙwaran fasahar firikwensin da kariyar watsawa har zuwa yau, da fasahar ci gaba da aikin haɗaɗɗiyar sassauƙa.

Nau'in nau'in nau'in C YSM6-12/24 SF6 RMU na iya cika buƙatun kasuwa mai canzawa gaba ɗaya. Yana iya ɗaukar SF6- 12/24 da aka samar da kai. Hanyoyin aiki don babban maɓalli a cikin babban naúrar zobe na iya zama ko dai na hannu ko wutar lantarki. Kuma yana iya biyan buƙatun "Sarrafa Hudu" idan an dace da FTU da RTU.

Zabi

Yanayin aiki

1. Yanayin iska: Matsakaicin zafin jiki: +40 ℃; Mafi ƙarancin zafin jiki: -5 ℃

2. Danshi: Matsakaicin zafi 95% na kowane wata; Matsakaicin zafi na yau da kullun 90%.

3. Tsayi sama da matakin teku: Matsakaicin tsayin shigarwa: 2000m

4. Ambient iskar ba a fili gurɓatar da iskar gas mai ƙonewa, tururi da sauransu.

5. Ba a yawan girgizawa

Siffofin

1. Naúrar mai shigowa tare da mai cire haɗin (Load break switch) tsare-tsare Tare da wasu ƙarin abubuwan da aka zaɓa na zaɓin naúrar fita tare da

2. Fuse-switch kariya makirci

3. Tare da wasu ƙarin abubuwan da aka zaɓa na zaɓi mai shigowa/mai fita da'ira na kariyar tsarin kariya tare da sauran ƙarin abubuwan haɗin gwiwa

4. Shirye-shiryen mitar MV na zaɓi

5. Tare da wasu ƙarin abubuwan da suka dace na Casings (Bas Bar Panel) schemasTare da sauran ƙarin abubuwan da aka zaɓa na zaɓi

6. Wasu

Bayanan fasaha

A'A.	Abubuwa	Naúrar	Siga
1	Ƙarfin wutar lantarki	kV	12	24
2	Ƙididdigar mita	Hz	50/60
3	Ƙididdigar halin yanzu	A	630/800
4	Mitar wutar lantarki 1min jure irin ƙarfin lantarki	kV	48	60
5	Wutar walƙiya tana jure wa wutar lantarki	kV	75	125/150
6	Ƙimar gajeriyar da'ira mai karya halin yanzu (kololuwa)	kA	80	63
7	An ƙididdige nauyi mai aiki/kusa da keɓan halin yanzu	A	63	50
8	Ƙididdigar canja wuri na yanzu	A	1700	1200
9	Ƙimar gajeriyar da'ira yin halin yanzu (kololuwa)	kA	80	63
10	Kebul (layi) mai ƙididdigewa yana yin caji mai karya halin yanzu	A	50 da 10
11	Cajin kebul na karya halin yanzu a laifin kasa	A	20	20
12	Ƙimar juriya na yanzu (kololuwa)	kA	80	63
13	gajeriyar lokacin jure halin yanzu (2s)	kA	31.5	25
14	Rayuwar injina	sau	2000

Lura: Don gajeriyar watsewar da'ira da kololuwar halin yanzu yana dogara ne akan Fuse plus hade.

Don tsarin rarraba allo

1. Mai cire haɗin haɗi

2. Fuse-switch kariya

3. Kariyar keɓaɓɓiyar kewayawa

4. MV mita

5. Casings (Bas Bar Panel)

2. Fuse-switch kariya

5 sassa na naúrar nau'in SF6 babban naúrar zobe:

1. Canja mai cire haɗin cubicle da maɓallin ƙasa a cikin wani shinge mai cike da SF6 kuma mai gamsarwa."tsarin matsin lamba ” buƙatun.

2. Kunshin mashaya bas duk a cikin jirgin sama ɗaya a kwance, don haka yana ba da damar haɓaka allo na baya da haɗi zuwa kayan aikin da ake dasu.

3. cubicle cubicle m ta gaba, dangane da ƙananan switch- disconnector da earthing sauya tashoshi (IM cubicles) ko ƙananan fis- holders (PM da QM cubicles). Wannan ɗakin kuma an sanye shi da wani

earthing canza ƙasa daga MV fuses don kariyar raka'a.

4. Tsarin aiki, haɗin gwiwa yana ƙunshe da abubuwan da ake amfani da su don aiki da switchdisconnector da maɓallin ƙasa da kunna abin da ya dace.

alamomi (tabbataccen hutu).

5. Low ƙarfin lantarki cubicle (na sama & ƙananan shinge tsarin) shigarwa na a

toshe tasha (idan an shigar da zaɓi na mota), fuses na LV da ƙananan na'urorin relay. Idan ana buƙatar ƙarin sarari, ana iya ƙara ƙarin shinge a saman

kubile.

6. Za a iya haɗa cubicles na zaɓi (IM) tare da: sarrafa kayan motsa jiki;

masu kame-kame.

An shigar da lambar juzu'i mai hawa uku a cikin ɗakin gas mai cike da iskar gas SF6 kuma matsi na dangi shine 0.4bars. Yana da kyakkyawan aikin aiki tare da aminci da aminci.

● Tsauri:

Gidan ɗakin iska yana cike da iskar SF6, wanda ya dace da daidaitattun buƙatun "rufe tsarin matsa lamba", kuma an bincika aikin hatimi kuma

dubawa a cikin masana'anta.

● Tsaron Aiki:

1. Maɓallin yana da matsayi uku na "rufe", "buɗe" da "ƙasa", kuma yana da

aikin kullewa don hana aiki na bazata. Ana tura lambar sadarwa don juyawa ta

tsarin ajiyar makamashi na bazara, wanda abubuwan aikin ɗan adam ba su da tasiri.

2. Yana da "hutu" da ayyukan warewa.

3. Ƙaƙƙarfan ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙarfin SF6 na ƙasa ya dace da daidaitattun buƙatun.

4. A yayin da wani hatsari ya faru, matsa lamba ya sauko bayan da iskar SF6 da aka yi amfani da shi ya karye ta hanyar diaphragm mai aminci, kuma za a fesa gas kai tsaye a bayan majalisar don aminci.

Ƙa'idar karya:

SF6 gas yana da kyakkyawan aikin kashe wuta. Lokacin da aka buɗe maɓallin, motsi na dangi tsakanin arc da gas zai kashe baka. Lokacin da lambobi masu motsi da a tsaye suka rabu, baka yana bayyana a cikin filin lantarki da magnet ɗin dindindin ya samar, kuma baka yana

elongated da kashe lokacin da na yanzu ke haye sifili ta SF6 gas. Nisa tsakanin lambobi masu motsi da a tsaye ya isa don jure yawan wutar lantarki. Tsarin yana da sauƙi kuma abin dogara, tare da ƙarancin lamba da kuma tsawon rayuwar lantarki.

● Alamar canjin kayan aiki:

Daidaita kai tsaye zuwa mashin tuƙi, waɗannan suna ba da ƙayyadaddun nuni na matsayi na lamba. (shafi A na daidaitaccen IEC 62271-102).

● Lever mai aiki:

Anyi ƙera wannan tare da na'urar anti-refl ex wacce ke dakatar da duk wani ƙoƙari na sake buɗe na'urar nan da nan bayan rufe maɓalli ko na'urar cire haɗin ƙasa.

● Na'urar kullewa:

Tsakanin makulli ɗaya zuwa uku yana ba da damar kulle masu zuwa:

● samun dama ga madaidaicin madaurin juyawa ko na'ura mai juyawa

● samun dama ga madaidaicin madaurin mai cire haɗin ƙasa

● Yin aiki da maɓallin turawa na buɗewa. ● Sauƙaƙe kuma ba tare da wahala ba

Gudanar da injina da na lantarki suna gefe da gefe a kan fashi na gaba, akan panel

gami da zane mai nuna halin na'urar (rufe, buɗe, ƙasa):

● Rufe:

Ana sarrafa mashin ɗin tuƙi ta hanyar aiki mai sauri, ba tare da mai aiki ba. Ba a adana makamashi a cikin maɓalli, ban da lokacin sauyawa

ana gudanar da ayyuka.

Don haɗaɗɗen fis ɗin sauyawa, tsarin buɗewa yana da makamai a lokaci guda yayin da lambobin ke rufe.

● Buɗewa:

Ana buɗe maɓalli ta amfani da na'ura mai sauri guda ɗaya, ana aiki da ita a gaba.

Don haɗin haɗin fuses fuses, buɗewa yana sarrafa ta:

● maɓallin turawa

● Laifi.

● Ƙasa:

Takamaiman mashin sarrafa c yana ba da damar buɗewa ko rufe lambobin ƙasa. An katange damar zuwa wannan sandar ta murfin da za a iya zamewa baya idan mai sauyawa

bude amma wanda ya rage a kulle idan an rufe shi.

Alamar kasancewar ƙarfin lantarki

Wannan na'urar ta haɗa nau'in fitilun VPIS (Voltage Presence Indicating System), daidai da daidaitattun IEC 61958, yana ba da damar kasancewar (ko rashi) na ƙarfin lantarki don bincika akan igiyoyi.

Rashin hankali ga muhalli

● Wurin da aka rufe, ya ƙunshi sassa masu aiki na LBSkit

(switch, earthing disconnector). An cika shi da SF6 daidai da ƙayyadaddun ƙayyadaddun ƙa'idodin IEC 62271-200 don "matsi da aka rufe.

tsarin”.

Ana duba tsare-tsare a cikin masana'anta.

An tsara sassan don samun ingantacciyar rarraba wutar lantarki.

Gabaɗaya da girman girma (mm)

Daidaita Gabaɗaya da girman girman (mm) na SF6 lodin break break switch-fuse hade Hoton 1) SF6 mai ɗaukar nauyi mai sauyawa ba tare da babban ɗaki ba.